Nutech EcoSafe Industrial Stripper 01LT

Description

Nu-EcoSafe Strip Industrial is a powerful, brushable, water-based coating stripper designed to remove tough industrial paints and protective coatings from a wide range of surfaces. Its biodegradable formulation is suitable for projects where abrasive blasting may be impractical, helping lift stubborn coatings while reducing the need for aggressive mechanical removal methods.
Formulated to tackle demanding coating removal jobs, Nu-EcoSafe Strip Industrial is effective on many urethane, latex, alkyd and varnish coatings, as well as most two-component epoxy coatings and fusion-bonded epoxies. It can be used on concrete, exposed aggregate, brick, masonry, timber and metal, making it a versatile solution for maintenance, renovation and industrial refurbishment projects.
Suitable for interior and exterior applications, the stripper can be applied by brush or compatible airless spray equipment. Once applied, it penetrates the coating to loosen and lift the paint, allowing removal by scraping, vacuum collection or pressure washing, depending on the substrate and project requirements.

Key Features & Benefits:
Industrial-strength stripping: Designed to lift tough paints and protective coatings, including many epoxy and urethane systems.
Water-based formulation: Water is used for equipment clean-up and final surface rinsing.
Broad substrate compatibility: Suitable for concrete, brick, masonry, timber and metal, subject to testing.
Versatile application: Can be applied by brush or compatible airless spray equipment.
Extended dwell time: Can remain active for up to 48 hours when kept wet, with actual stripping times depending on the coating and conditions.
Reduced reliance on abrasive blasting: Useful where blasting is impractical due to environmental, economic or equipment-protection concerns.
Suitable for refurbishment: Ideal for maintenance and restoration projects involving existing painted surfaces.

Typical Applications:
Industrial and commercial buildings
Painted concrete floors
Bridges and selected marine structures above the waterline
Water storage tanks and water treatment facilities
Food processing facilities
Petrochemical and pulp and paper facilities
Historical building renovations
Concrete pools and selected fibreglass pool surfaces
Metalwork, weatherboards and exterior timber

Suitable Surfaces:
Concrete, exposed aggregate, asphalt, slate, brick, masonry, metal, exterior timber, weatherboard and selected pool surfaces.

Product Specifications;
Product type: Water-based industrial coating stripper
Appearance: Pale orange
pH: 3.5–4.5
Application temperature: 20°C–32°C
Coverage: Approximately 1–2.2 m²/L
Coats Required: Two (please read TDS carefully)
Application methods: Brush or compatible airless spray; roller for horizontal surfaces only

🔮ICR Pro Tip.
For effective coating removal, apply Nu-EcoSafe Strip Industrial at approximately 1.5–2 times the thickness of the coating being removed. Allow sufficient dwell time for the stripper to penetrate — many coatings require 2–36 hours. Keep the product wet throughout the process, as allowing it to dry can reduce its effectiveness. Always test a small area first and rinse away all chemical residue before applying a new coating.