Nutech AntiSlip Mix In 400g

Description

Nutech AntiSlip Mix In is a specialised polymer additive designed to improve the slip resistance of compatible Nutech single-pack floor sealers and coatings. Added directly to the final coat, it creates a textured finish that increases surface friction and helps reduce the risk of slips in both wet and dry conditions.
Ideal for areas exposed to moisture, foot traffic and everyday wear, AntiSlip Mix In is suitable for compatible coating systems used around pools, factory loading docks, access ramps, stairs, entrance foyers and public pedestrian or vehicle areas.
The easy-to-use powder blends into the selected coating to provide a more slip-resistant surface without requiring a separate anti-slip coating. When mixed and applied according to the manufacturer's instructions, it can achieve P2 or P3 wet slip-resistance classifications, depending on the compatible coating system and additive dosage.

Key Features & Benefits:
Improves slip resistance: Increases surface friction to help reduce slip potential in wet and dry conditions.
Easy to mix: Blends directly into compatible Nutech coating systems.
Flexible and scuff-resistant: Designed to withstand everyday surface use.
Less abrasive texture: Helps improve traction without an excessively harsh surface.
Adjustable performance: Additive quantities can be varied according to the manufacturer's recommendations.
Versatile applications: Suitable for selected pedestrian and vehicle traffic areas.
Slip-resistance classifications: Can achieve specified P2 or P3 classifications when used in accordance with the relevant product instructions.

Suitable Applications:
Pool surrounds and wet areas
Factory loading docks
Access ramps with an incline below 15 degrees
Stairs and entrance foyers
Public pedestrian areas
Selected vehicle traffic areas
Painted surfaces requiring improved slip resistance

🔮ICR Pro Tip.
For optimum performance, add AntiSlip Mix In to the final coat only. Use 400g per 20L for the manufacturer's specified P2 application rate, or 800g per 20L for the specified P3 rate where the selected coating system permits it. Stir thoroughly until evenly distributed, allow the mixture to stand for 10 minutes, then stir again before application. Keep the mixture agitated during use to maintain an even finish